Robot de palettisation et convoyeurs de planches dans une usine de blocs béton équipée par ALFI Technologies

Handling and palletising for concrete product plants

Elevators, curing chamber finger cars up to 20 levels, cubing systems, palletising robots and an induction double-pallet exit shuttle: ALFI Technologies designs and integrates all the handling of your block, paver and kerb plant.

Accueil ‣ Equipment ‣ Handling and palletising for concrete product plants

Handling sets the pace of your plant

In a block, paver or kerb plant, the press never produces faster than the handling around it. ALFI Technologies designs, manufactures and integrates the whole chain: elevators and lowerators, curing chamber finger cars, cubing systems and palletising robots, and an induction-powered double-pallet shuttle at the line exit. One team, one control system, from the press outfeed to the storage yard.

20

curing chamber levels served

Rotating or non-rotating finger cars, serving up to 20 rack levels.

0

power cable on the shuttle

The double-pallet exit shuttle is induction-powered, with no contact.

100%

designed and built by ALFI

Grippers, cubing systems and finger cars designed for your heavy products.

Planning a new plant? Handling is fully integrated into our Advanced concrete production line, built around our ADLER vibrating presses.

The journey of a production board, from press to pallet

  • Press outfeed: boards of fresh products are conveyed to the elevator.
  • Elevator: it stacks the boards level by level to build a full load.
  • Finger car: it carries the load into the curing chamber racks, then collects the cured products.
  • Lowerator: it returns the boards one by one to the outfeed line.
  • Cubing system or robot: products are removed from the boards and stacked into cubes.
  • Pallet exit: an induction-powered double-pallet shuttle takes the pallets to the storage dock, while empty boards return to the press.

Our handling systems

Finger car and elevator serving the racks of a concrete block curing chamber
Finger car and elevator in front of curing chamber racks

Elevators, lowerators and finger cars

The elevator and lowerator connect the production line to the curing chamber. The finger car travels between them and stores the loads in the racks.

  • Rotating or non-rotating finger cars, depending on your curing chamber layout.
  • Up to 20 rack levels served.
  • Automatic operation, controlled by the line automation.

Cubing systems

The cubing system picks the products from the board and stacks them layer by layer into cubes ready for delivery: blocks, pavers, kerbs or hollow-core slabs.

  • Gripper and laying pattern designed for your product range.
  • Regular cubes, ready for storage and delivery.
  • Connection to the equipment downstream of the line.
ALFI Technologies cubing system stacking concrete blocks into cubes at the line exit
Cubing system at the line exit
ALFI Technologies palletising robot and board conveyors in a concrete block plant
Palletising robot and custom gripper

Robotic palletising cells

Multi-axis robots bring flexibility: product changes without mechanical adjustment, multiple palletising patterns, additional functions. Our grippers are custom designed and built for heavy products.

  • Fast format changes from the operator screen.
  • Less manual handling and strain for operators.
  • Robots can be reused if your process changes.

Pallet exit by induction double-pallet shuttle

At the end of the line, an induction-powered double-pallet shuttle carries two pallets at a time and places them on a storage dock, where a forklift picks them up for the stock yard. Power is transferred without contact: no trailing cable or cable chain exposed to wear and concrete dust.

  • Two pallets carried per cycle.
  • Automatic drop-off on the storage dock, picked up by forklift.
  • Controlled by the line automation.
Induction-powered double-pallet shuttle carrying two pallets of concrete blocks to the storage dock
Induction double-pallet shuttle: two pallets of blocks to the storage dock

A robotic cell in production

Automatic palletising and handling of concrete products: an example of a robotic cell built by ALFI Technologies.

Concrete robotic cell: automatic palletising and handling

Controlled and monitored handling

All handling equipment is connected to the line automation and supervision. With our ALFI InUse platform, you monitor production, stoppages and the output of each machine. We also upgrade existing lines: finger car modernisation, adding a robot or a cubing system, automation retrofit.

Frequently asked questions about handling in concrete plants

Which handling equipment makes up a concrete block line?

A complete line combines board conveyors, elevator, finger car, curing chamber, lowerator, cubing system or palletising robot, and a double-pallet exit shuttle. ALFI Technologies supplies and integrates the whole system.

What is the difference between a rotating and a non-rotating finger car?

A rotating finger car turns on itself to serve racks or stations facing different directions; a non-rotating one travels in a straight line. The choice depends on your curing chamber layout. Our finger cars serve up to 20 levels.

Cubing system or palletising robot: which one to choose?

A cubing system is optimised for output on a stable product range. A robot brings flexibility when formats and palletising patterns change often. We advise you according to your product mix.

Why an induction-powered double-pallet exit shuttle?

The shuttle carries two pallets per cycle to the storage dock. Its induction power supply transfers energy without contact and eliminates cables and cable chains exposed to wear and concrete dust.

Can the handling of an existing line be upgraded?

Yes. We add a robot or a cubing system, modernise a finger car or retrofit the automation, including on older-generation lines.

Does ALFI Technologies manufacture its own equipment?

Yes. Finger cars, cubing systems and grippers are designed and built in our workshops in France, then integrated and commissioned by our teams.

An equipment project? Let’s talk

Tell us about your needs: products, target output, existing installation. Choose the “New machines” topic: your request goes straight to our specialist, who will answer you personally.

  • Project study and quotation
  • Visit of your factory or of our facilities
  • Advice on integration with your existing equipment