
Insulating foam injection for concrete blocks
Produce insulating concrete blocks on your line: mineral foam injected into the cores with Energy & Process BLOCK FILL machines, integrated by ALFI Technologies. Up to R = 1.8 m²·K/W.
Insulating concrete blocks, produced on your line
A traditional hollow concrete block has a thermal resistance R of 0.2 to 0.3 m²·K/W. Fill its cores with an insulating mineral foam and the same block reaches up to R = 1.8 m²·K/W. ALFI Technologies and its partner Energy & Process integrate this injection step directly into your block plant: your vibrating presses keep producing, and your line delivers insulating blocks ready for the most demanding energy regulations, such as the French RE2020.
×6
thermal resistance of the block
Up to R = 1.8 m²·K/W for a 20 cm block, versus 0.2 to 0.3 for a hollow block.
20,000
foam-filled blocks per shift
That is 2,000 boards of 10 blocks per shift: the output achieved on a line equipped by ALFI Technologies.
100%
mineral
A non-combustible foam with no polystyrene: blocks rated Euroclass A1 according to the AIRIUM manufacturer.
Thermal performance stated by the foam manufacturer Lafarge AIRIUM (up to R = 1.77 m²·K/W, NF Th certified, for the R1.8 block). It depends on your block geometry and the foam selected.
Building or upgrading a block plant? Discover our Advanced concrete production line and our ADLER vibrating presses.
Insulating foam injection on video
Cores filled by a multi-nozzle manifold, then automatic transfer of the boards on ALFI Technologies conveyors: 40 seconds inside a block plant in production.
How mineral foam injection works
The principle is simple: produce a stable mineral foam, then dose it precisely into every core, board after board, without slowing down the line.
- Foaming: a lightweight cement-based mineral foam is produced continuously and adjusted to the target thermal performance.
- Injection: the BLOCK FILL machine fills the cores of the whole board at once through a manifold of metered nozzles.
- Transfer: the boards of foam-filled blocks continue on ALFI Technologies conveyors and handling equipment.
The block keeps its dimensions and mechanical strength: it is laid like a standard concrete block.

What an insulating concrete block brings you
A higher-value product
Insulating blocks meet the demand created by stricter energy regulations, competing with insulating bricks and blocks with added insulation.
Keep your press
The BLOCK FILL Adaptable range adapts to your press, your block geometries and your standard accessory blocks.
Industrial output
Up to 20,000 foam-filled blocks per shift (2,000 boards of 10 blocks), in line, with no manual handling.
A mineral insulation
No polystyrene, no plastic: the block remains 100% mineral and non-combustible (Euroclass A1 stated for AIRIUM blocks).
Easy to lay
For your masonry customers, a single load-bearing and insulating product, laid like a standard block.
An integrated line
ALFI connects the injection to your line: conveyors, board handling, automation and supervision.

A partnership between ALFI Technologies and Energy & Process
Energy & Process designs the BLOCK FILL machines and the foaming process, developed with the Lafarge Research Centre.
ALFI Technologies, manufacturer of ADLER vibrating presses, integrates the injection into your plant: layout study, conveyors, board handling, automation, commissioning and after-sales service.
Your foam supplier: the line works with the mineral foams on the market, for example AIRIUM by Lafarge, already used by several French block manufacturers. Discover AIRIUM blocks and their performance.
Frequently asked questions about insulating concrete blocks
What is a mineral foam insulating concrete block?
It is a hollow concrete block whose cores are filled at the factory with a cement-based insulating mineral foam. The block remains load-bearing and becomes insulating, without polystyrene.
What thermal resistance does a foam-filled block reach?
For a 20 cm block, manufacturers state a thermal resistance R of 1 to 1.8 m²·K/W, versus 0.2 to 0.3 m²·K/W for a traditional hollow block. The value depends on the block geometry and the foam density.
Can foam injection be added to an existing block line?
Yes. The BLOCK FILL machine adapts to your press and your block geometries. ALFI Technologies studies the layout in your plant and the connection to your line: conveyors, handling and automation.
What production output can be achieved?
Up to 20,000 blocks per shift, that is 2,000 boards of 10 blocks: the output achieved on a line equipped by ALFI Technologies. It depends on the block format and the line configuration.
Is a specific foam required?
No. The line works with the mineral foams on the market, such as AIRIUM by Lafarge. You choose your supplier according to your performance and cost targets.
Do insulating blocks help meet the French RE2020?
The RE2020, in force since 1 January 2022 for new housing in France, tightens building insulation requirements. A block with a high thermal resistance helps meet them; compliance is always calculated at building level.
Is a mineral foam filled block fire resistant?
Yes. The foam is mineral, therefore non-combustible: the AIRIUM manufacturer states a Euroclass A1 rating for its blocks and a fire resistance of up to REI 180 on a rendered wall.
An equipment project? Let’s talk
Tell us about your needs: products, target output, existing installation. Choose the “New machines” topic: your request goes straight to our specialist, who will answer you personally.
- Project study and quotation
- Visit of your factory or of our facilities
- Advice on integration with your existing equipment